Inicio / Productos / Installation / Waterproofing / sylastic premium

SYLASTIC PREMIUM

15KG

100316193

sylastic Premium is a one-component cement waterproofing with excellent adhesion and deformability, especially recommended for waterproofing exteriors. Compatible with type C2 cement adhesives in accordance with EN 12004. For indoor and outdoor use.

Prevents the need of screed between waterproofing sheet and ceramic floor, thus reducing the final system thickness. It is applied in two 2 mm layers each, with a fiberglass mesh reinforcement on the first application. Special pieces and bands available for waterproofing joints and other critical spots.

Data sheet
Technical details
Graphics
Catalogue

  • Single-component waterproofing mortar
  • Waterproofing for both positive and negative hydrostatic pressure
  • Waterproofing of interiors and exteriors
  • Maximum waterproofing with the minimum thickness (2 mm)
  • Suitable for direct installation of tiles with cementitious adhesive
  • Excellent adherence and maximum deformability
  • Permeable to water vapor, prevents moisture condensation
  • Suitable for direct contact with water
  • Mixing water: 3.6 liters per 15 kg bag

  • Shower trays and cabins, bathrooms, spas and facilities in environments with permanent humidity
  • Exterior terraces and balconies
  • Pools and facilities in direct contact with water
  • Basements, elevator shafts or tunnels even below the water table
  • Cisterns and tanks in direct contact with water
  • Repair of cracked screeds and plasters

  • Cement mortar floors and plasters
  • Concrete sheets
  • Existing wall and floor tiles
  • Plasterboard sheets
  • Before applying sylastic Premium, moisten the support with water. On substrates which are cracked or potentially subject to slight movements, reinforce the second layer of sylastic Premium with a fiberglass mesh. Do not apply on plaster supports

  • Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3
  • Glass mosaic
  • Natural stone and marble

  • Bond coat
  • - One-layer application 1.5 kg / m2
  • Waterproofing
  • - Two-layer application 3.6 kg / m2
  • Mean thickness per imperbox layer: 1.5 mm

NEWSLETTER

    CUSTOMER SERVICE

    ABOUT US

    PROFESSIONALS

    PORCELANOSA GROUP